Wood Waste

Overview

Waste wood is wood which is not virgin timber (that is, wood that has been used for any purpose) and associated residues such as off-cuts, shavings chippings and sawdust, either treated or not treated, is waste. They remain waste and subject to waste regulatory control until completely recovered.

Where virgin wood is mixed with waste wood such as fence posts, pallets, construction boarding or other waste, the mixed load is considered waste.

Treated waste wood is wood that has been treated by being injected, impregnated, sprayed, infused (soaked) or surface coated with any organic or inorganic substances for the purposes of preserving or protecting it or for changing its appearance. Some of these treatments may not be obvious and visible. Surface coating includes varnishes and paints, glues and non-natural veneers.

Waste wood is categorized into 4 different types; Grade A-D. This is based on the quality of wood, the utilization of the wood, and type/amount of contaminants with Grade A being primarily clean wood off-cuts, Grades B and C representing increasing quantities of chipboard, MDF and laminated wood with wood off-cuts, and Grade D representing treated wood that is generally classified as Hazardous Waste.

The wood types listed later represent those categories used by local authorities for the wood they manage, primarily at HWRC sites, which do not correlate with the Grade A to D approach due to the way the data is collected through WasteDataFlow

Macro Tonnages

The most recent information published by DEFRA is summarized in the pie chart below, with 3,362,970 tonnes of wood generated in the UK in 2016 and is part of the broader tonnage summarized in UK Waste Tonnage:

File:Wood Waste Generation.png

Wood waste - Tonnage Reported as Generated by DEFRA in 2016

Whilst the macro numbers show 3,362,970 tonnes the general view of several market commentators was that the total wood arising was between 4,500,000 and 5,700,000 tonnes in 2014/15 and this can be accounted for a the DEFRA data being unable to identify wood in the mixed waste streams - this wood then may or may not be pulled out at MRFs or other similar Treatment facilities to make this wood available for Recycling and Recovery.

Chipboard and MDF

Chipboard is a hard material made out of very small pieces of wood which have been pressed together. It is often used for making doors and furniture.

MDF is an abbreviation for medium-density fibreboard, it is a wood-substitute material used in interior decoration.

Below is a list of local authorities that sends more than 4000 tonnes of this material to a single waste operator. ‌

Authority	Stream	Facility	Operator	Address	Material	Tonnes
Nottinghamshire County Council	Source segregated recyclate	Reprocessor - recycling (qu19)	Timberpak Ltd	Cross Green Vale, Cross Green Ind Est, Leeds, West Yorkshire	Chipboard and mdf	9,188.99	{{{date}}}
South Lanarkshire	Source segregated recyclate	Reprocessor - recycling (qu19)	Not Available	Not Available	Chipboard and mdf	7,297.03	{{{date}}}
Cheshire East	Source segregated recyclate	Reprocessor - recycling (qu19)	R Plevin & Sons Ltd	Cheshire Street, Mossley, Ashton Under Lyne, Lancashire	Chipboard and mdf	6,065.50	{{{date}}}

Composite Wood Materials

Wood composites include a range of different derivative wood products, all of which are created by binding the strands, fibers or boards of wood together. It is also referred to as man-made wood, manufactured board, engineered wood, or wood-plastic composite (WPC) when using wood fibers and thermoplastics. They are fixed using adhesives and are engineered to certain specifications, resulting in a material that can have diverse applications. ‌ Wood composites are usually made from the same hardwoods and softwoods used for timber, except when using scraps and wood waste, and are created by mixing ground wood particles with heated thermoplastic resin. Both virgin and recycled thermoplastics are used, with polyethylene-based products being the most common. Composite wood materials are used in a wide range of applications arising mainly from household, industrial and construction sources.

Below is a list of local authorities that sends more than 1000 tonnes of this material to a single waste operator.

Authority	Stream	Facility	Operator	Address	Material	Tonnes
Cardiff County Council	Source segregated recyclate	Reprocessor - recycling (qu19)	Other/Exempt	JM ENVIROFUEL; JM ENVIROFUELBerth 31 Wimborne Road, Barry CF63 3DHEPR/AB3690CP	Composite wood materials	5,308.48	{{{date}}}
Edinburgh, City of	Source segregated recyclate	Other Method	Not Available	Not Available	Composite wood materials	3,326.18	{{{date}}}
Gwynedd Council	Source segregated recyclate	Reprocessor - recycling (qu19)	Hadfield Wood Recyclers Ltd	Lumb Lane, Droylsden, Manchester	Composite wood materials	1,425.93	{{{date}}}

Wood

Below is a list of local authorities that sends more than 20000 tonnes of this material to a single waste operator.

Authority	Stream	Facility	Operator	Address	Material	Tonnes
Greater Manchester WDA (MBC)	Source segregated recyclate	Reprocessor - recycling (qu19)	Hadfield Wood Recyclers Ltd	Lumb Lane, Droylsden, Manchester	Wood	42,760.47	{{{date}}}
Worcestershire County Council	Source segregated recyclate	Reprocessor - recycling (qu19)	Dew Mr David & Dew Mr Jonathan	Unit 100, Blackpole Road, Blackpole Trading Estate, Worcester, Worcestershire	Wood	33,990.98	{{{date}}}
Hampshire County Council	Source segregated recyclate	Reprocessor - recycling (qu19)	Multiple destinations	Multiple	Wood	26,590.90	{{{date}}}
Lancashire County Council	Source segregated recyclate	Reprocessor - recycling (qu19)	Sita ( Lancashire ) Ltd	Clifton Marsh Landfill Site, Lytham Road, Clifton, Preston, Lancashire	Wood	22,299.41	{{{date}}}

Wood for composting

Below is a list of local authorities that sends more than 2000 tonnes of this material to a single waste operator.