Knostrop Clinical Waste Incinerator: Difference between revisions
mNo edit summary |
|||
| Line 14: | Line 14: | ||
The flue gases from the [[Incineration]] process then pass through a secondary chamber, or afterburner, where any gaseous products of [[Combustion]] are burned out under oxygen rich conditions. This stage is designed to destroy any Carbon Monoxide, Volatile Organic Compounds, and dioxins and furans produced by the [[Combustion]] process. | The flue gases from the [[Incineration]] process then pass through a secondary chamber, or afterburner, where any gaseous products of [[Combustion]] are burned out under oxygen rich conditions. This stage is designed to destroy any Carbon Monoxide, Volatile Organic Compounds, and dioxins and furans produced by the [[Combustion]] process. | ||
The flue gases are then cooled by passing through a waste-heat boiler and economiser, before passing into the final, abatement section of the process. Powdered lime (Calcium Hydroxide) and powdered activated carbon are added to the flue gases entering the abatement process to remove acid gases, heavy metals and residual dioxins and furans before discharge to atmosphere from the stack. The flue gases being discharged from the stack are continuously monitored for Hydrogen Chloride, Sulphur Dioxide, Carbon Monoxide, Oxides of Nitrogen, particulate matter (dust), Volatile Organic Compounds, oxygen and moisture content. | The flue gases are then cooled by passing through a waste-heat boiler and economiser, before passing into the final, abatement section of the process. Powdered lime (Calcium Hydroxide) and powdered activated carbon are added to the flue gases entering the abatement process to remove acid gases, heavy metals and residual dioxins and furans before discharge to atmosphere from the stack. The flue gases being discharged from the stack are continuously monitored for [[wikipedia:Hydrogen chloride|Hydrogen Chloride]], [[wikipedia:Sulfur dioxide|Sulphur Dioxide]], Carbon Monoxide, Oxides of Nitrogen, particulate matter (dust), Volatile Organic Compounds, oxygen and moisture content. | ||
The incineration process produces two residues; bottom ash and spent lime. The bottom ash is sent to a recycling transfer station for reprocessing, the bulk of the material ultimately ending up as a landfill cover material. The spent lime, which is the residue from the flue gas abatement process, went to a site in Leeds where it is used to neutralise acidic wastes. | The incineration process produces two residues; bottom ash and spent lime. The bottom ash is sent to a recycling transfer station for reprocessing, the bulk of the material ultimately ending up as a landfill cover material. The spent lime, which is the residue from the flue gas abatement process, went to a site in Leeds where it is used to neutralise acidic wastes. | ||