Incineration with Energy Recovery

From Wikiwaste
Revision as of 16:13, 5 March 2021 by Bin52 (talk | contribs) (add page specific text)


In the context of WikiWaste Incineration with Energy Recovery is a ‘waste destination’ description that appears in WasteDataFlow.

Use in WasteDataFlow

Waste Disposal Authorities will select this option from a drop down list within WasteDataFlow if the Residual Waste collected by the Waste Collection Authorities or Residual Waste collected at the Household Waste Recycling Centres has been sent to an incineration facility that is defined as Energy Recovery Facility.

Context and Definition

If an Incineration facility can be shown to meet the energy efficiency measurement of R1 it can be classified as a recovery facility, if it cannot it is classified as a disposal facility[1]. This means that an incinerator that generates power, and is a net exporter of power, can be described as an Energy from Waste(EfW) facility. An incinerator that is an EfW facility that meets the R1 criteria is the only type of incinerator under the legislation that can legitimately describe itself as an Energy Recovery Facility (ERF).

The most recent recent BREF guidance[2] also sets out how incinerators can be described by:

However, there are a range of other terms used in the sector to describe different types of incineration, the kiln/furnace used, and the subsidy that may apply to them, and these are captured in the table below:

Definitions in Legislation   Types Temp. Range °C Category   Kiln/Furnace/Reactor
Incineration With Energy Recovery Combustion 800 - 1450 Thermal Treatment Grate
Fluidised Bed
Gasification 500 - 1600 Advanced Thermal Treatment (ATT and ACT) Rotary
Without Energy Recovery Plasma
Pyrolysis 250 - 700 Advanced Thermal Treatment (ATT and ACT) Heated Tube
Surface contact